How To Do A Porsche Engine Oil Change

Do it yourself Porsche oil changes will help you save money while also extending the vehicle’s service life. Following the guide below will require tools such as a wrench set, rag, safety glasses and a rubber mallet. You’ll also need an oiled filter gasket, engine oil, container and an oil filter.

Step One: Purchase the Correct Oil

Porsche is a high end vehicle that requires premium oil. Don’t even think about using an economy brand otherwise it could damage the internal components or cause other problems. Check the manual to determine the best type for your model.

Step Two: Extract its Oil Plug

Spread plastic sheet along the ground which is large enough to surround the vehicle. Now drive the Porsche on top. This is done to minimize oil cleanup after the work is done, as all you need to do is discard the plastic sheet without having to clean the floor. Jack the car up, put stands in position, then lower the vehicle. Look underneath, find its oil plug then unscrew it.

Step Three: Extract its Oil Filter

Crank the oil filter off then ensure its rubber gasket is also removed. Otherwise, peel it away from the vehicle’s engine.

Step Four: Get Your Oil Filtered Wrench

There are specific oil filtered wrenches that function best with certain cars. Find one for your Porsche which gives you sufficient room for maneuvering.

Step Five: Add Newer Oil

Refill the vehicle’s engine by applying a funnel, pouring in the new oil and then recapping the bottle so spills are avoided.

Step Six: Recycle Your Old Oil

Do not throw away the older oil you removed from the vehicle. Instead, place it inside a used jug and take it to a collection or recycling center where it can be properly disposed of. After the engine has been filled, start it up then let it run until its dashboard light deactivates. After a few moments, use a dipstick to inspect the oil and add more if required.

Additional Dos and Don’ts

• If the vehicle’s engine is cold, let it start up then run for about five minutes until the oil becomes warm.
• Avoid using a socket or adjustable wrench in its drain plug. Instead, use a box ended wrench that is properly sized, preferably metric.
• Always employ jack stands. Working under a vehicle that is only supported by one jack is dangerous.
• Apply your newer oil so it coats the oiled filter gasket before you spin it on.
• Always ensure the filter is tightened by hand. Do not employ the filter wrench.
• To locate an oil recycling facility near your location, visit com.

How Does Full Synthetic Oil Differ from Synthetic Blend?

Synthetic blend is the oil of choice for vehicles which put tremendous strain in their engines, like haulers, off-roading and towing heavy trailers. It combines both conventional and synthetic base oils, along with additives. Full synthetic oil on the other hand has fewer impurities, but still offers persuasive resistance for oxidation while retaining performance even with high temperatures.